Registered Licence

 Top  Previous  Next

By clicking the "I Agree" button you agree to all these terms and conditions.

Double-click to Zoom

 

UDC V2.8.8.2 ORDINARY LICENCE

Date of Effect: 22/9/2005

 

TERMS

This section contains terms specific to ordinary licensed copies of the Software.

 

The Software may only be accessed by the number of Users, or installed on the number of workstations, paid for. Unless other arrangements have been made the number of Users or workstations is one only.

 

Users are permitted to distribute evaluation copies of this Software to other potential bona fide purchasers.

 

Users must not cause licence serial numbers to be disclosed to any other party.

 

The terms set out below also apply.

 

PURPOSE OF SOFTWARE

The Software is intended to be, and is provided on the basis that it is, a mere aid and does not excuse the User from exercising the degree of independent care and skill appropriate to each situation. Different Users may have different accuracy requirements. The User must satisfy itself that the accuracy of the program is fit for the particular purpose for which it is used.

 

The Supplier does not undertake to train the User in the correct use of the Software's facilities other than by providing context-sensitive on-line help. It is the User's responsibility to ensure that appropriate settings are selected for each calculation.

 

The User acknowledges that all Software is potentially flawed, particularly in light of the ever-increasing range of environments in which Software is required to operate. The Software is neither intended nor priced to survive intense scrutiny in all circumstances.

 

QUALITY CONTROL

The User must immediately notify the Supplier of any actual or suspected calculation defect or other error, and refrain from using the Software in any potential loss situation until addressed by the Supplier. The Supplier is not liable for any loss that could have been avoided or mitigated by complying with this term. The Supplier will respond expeditiously to any defect notification.

 

The User must give the Supplier and keep up to date: (a) an e-mail contact address, and (b) at least one of the following: (i) facsimile number (ii) mail address. The User irrevocably authorises the Supplier to use those addresses for the purpose of notifying the User about program updates defects or bulletins.

 

If required by notice from the Supplier, the User must forthwith update its version(s) of the Software, but only if the Software is provided to the User for free download from the Internet. This term may be modified by the particular supply arrangement between the parties.

 

LIMITATION OF LIABILITY

To the extent allowed by law the Suppliers' liability for any direct or indirect loss is limited at the Supplier's sole discretion:

 

(a)In connection with supplied goods to:

 

(i)        the replacement of the goods or the supply of equivalent goods;

(ii)        the repair of the goods;

(iii)the payment of the cost of replacing the goods or of acquiring equivalent goods;

(iv)        the payment of the cost of having the goods repaired; or

 

(a)In connection with supplied services to:

 

       (i)        the supplying of the services again; or

       (ii)        the payment of the cost of having the services supplied again.

 

The Supplier and User each acknowledge that the Supplier provides this Software under licence from its own Licensors and that no representations have been made by, and no liability whatsoever attaches to, such Licensor's or their agents heirs and assigns.

 

AMENDMENT OF LICENCE

The Supplier may amend the licence and conditions of use from time to time but may not unilaterally charge any fee unless expressly authorised. Notice will be deemed to be sufficient if and when published to the Internet at the supplier's web site.

 

 

SUPPORT

Unless other arrangements have been entered into, the Software price has not allowed for significant direct support by the Supplier. Therefore, before contacting the Supplier for assistance, the User must follow the following procedure:

 

1. Consult the on-line help that is built into the Software. It can be accessed through the main menu or through the help speedbutton on the main toolbar. It can also be accessed directly by positioning the cursor on the item of interest and pressing F1.

 

2. Having done that, the User may contact the Supplier through the e-mail facility built into the Software. Go to the main menu and select Help|Ask Lawtech. This will create a new e-mail that has been properly addressed to the appropriate Lawtech department.

 

OTHER

This licence expressly forbids any use or analysis for the purpose of reproducing, re-engineering or producing a similar Software product, and breach of this condition is agreed to sound in damages equal to the commercial loss (if any) occasioned to the Supplier.

 

The applicable substantive and procedural laws are the State laws of Queensland and the Federal laws of Australia and the User consents to those jurisdictions.

 

DEFINITIONS

"Software" means Ultimate Date Calculator V2.0.29 and includes any service in connection with the Software program and materials.

 

"Supplier" means Lawtech (Aust) Pty Ltd and its assigns agents and distributors. In connection with reduction or denial of liability it includes any third party supplier of intellectual property.

 

"User" means the purchaser or evaluator or persons using the Software under them.

 

 

DO YOU AGREE?

 

The User signifies it's agreement to all these terms each time it clicks the [I Agree] button.

 

If the User does not agree to these terms then there is no obligation to continue and you must click the [Exit] button to terminate immediately.